Archives: Flyers

  • Another King Tony Summer Promo at Wallace Heron 2026

    Another King Tony Summer Promo at Wallace Heron 2026

    King Tony’s Summer Promo runs from 1 November 2026 to 31 January 2027. Below is the full flyer by category, with every part number so you can search it on our site. Prices are ex GST, with inc GST in brackets, as printed in the King Tony flyer.

    Not every line is on our shelf at all times. Call us on 09 238 3281 or email sales@wallaceheron.co.nz and we will confirm stock before you make the trip. Specials are available while stocks last.

    Enter the King Tony Knights prize draw

    Buy either the KT2536MRVK or the KT2551MRV03K Knights socket set between 1 November 2026 and 31 January 2027 and you receive one entry in the draw to win a King Tony Knights 6-drawer trolley with a 202-piece tool set.

    • To enter: email a copy or image of your receipt to marketing@foxgunn.co.nz.
    • The draw: run by Fox & Gunn Ltd after the promotion ends. The winner is contacted within seven days of the draw (15 February 2027).
    • The prize: non-transferable and cannot be exchanged for cash. Entry is subject to the Fox & Gunn terms and conditions printed in the flyer.

    Bonus item: Armor All Clean & Detailing Kit

    Lines marked + Bonus item below come with an Armor All Clean & Detailing Kit: protectant, super heavy duty car wash, windscreen wash, microfibre cloth and a large sponge.

    Knights socket sets (prize draw entry)

    Part no. Description Price ex GST
    KT2536MRVK 36pc 1/4″ DR socket set, EVA black (Knights)
    5-14mm, 6pt
    $119.70 (inc. $137.65)
    KT2551MRV03K 51pc 1/4″ DR socket set, EVA black (Knights)
    4-14mm, 6pt
    $141.30 (inc. $162.50)

    Tool chests and complete tool sets

    Part no. Description Price ex GST
    KT911-152CRV9 152pc tool set in 9-drawer box
    Red, black handles
    $1,650.00 (inc. $1,897.50)
    KT87411K-9B 9-drawer toolbox, red with black handles
    Heavy gauge steel, ball-bearing drawer slides, fold-down locking system, powder coat finish, drawer liners and 4 bottom rubber mats, plastic drawer divider. 660(W) x 307(D) x 427(H) mm
    $599.00 (inc. $688.85)
    KT919-325MRV-SA 325pc metric tool set, 4-drawer toolbox + 7-drawer roll cab $3,599.00 (inc. $4,138.85)
    KT919-352CRV-SA 352pc metric and imperial tool set, 4-drawer toolbox + 7-drawer roll cab $3,499.00 (inc. $4,023.85)
    KTSC9A05-062MR 62pc fold-up tool chest set, 3 sections $599.00 (inc. $688.85)

    Socket and combination sets

    Part no. Description Price ex GST
    KTSC7396MR 96pc socket and wrench set in case
    12-24mm, metric
    + Bonus item
    $279.00 (inc. $320.85)
    KTSC9543MR 143pc combination socket set
    1/4″, 3/8″ and 1/2″ drive, 6pt
    $599.00 (inc. $688.85)
    KT4042CR06 42pc 1/2″ DR combination socket set
    12pt
    + Bonus item
    $395.00 (inc. $454.25)
    KT2549CR01 48pc 1/4″ DR socket set
    Metric and imperial
    + Bonus item
    $225.00 (inc. $258.75)
    KT3055CR01 55pc 3/8″ DR socket set
    12pt, metric and imperial
    + Bonus item
    $349.00 (inc. $401.35)
    KT6224CR 24pc 3/4″ DR combination socket set
    12pt
    + Bonus item
    $535.00 (inc. $615.25)

    Impact sockets and adapters

    Part no. Description Price ex GST
    KT4410MP01 8pc 1/2″ DR deep impact socket set
    12-24mm
    $99.00 (inc. $113.85)
    KT4415MP03 15pc 1/2″ DR deep impact socket set
    10-32mm, metric
    + Bonus item
    $199.00 (inc. $228.85)
    KT4418MP 8pc 1/2″ DR impact hex bit socket set
    H5-H19
    $89.00 (inc. $102.35)
    KT6414MP 14pc 3/4″ DR deep impact socket set
    19-41mm
    + Bonus item
    $339.00 (inc. $389.85)
    KT4427MP 27pc 1/2″ DR impact socket set
    8-36mm
    + Bonus item
    $245.00 (inc. $281.75)
    KT4435MP 25pc 1/2″ DR deep impact socket set
    8-36mm
    + Bonus item
    $286.00 (inc. $328.90)
    KT6424MP 14pc 3/4″ DR impact socket set
    24-65mm
    $335.00 (inc. $385.25)
    KT786P06 6pc impact socket adapter set
    1/4″ to 3/4″
    $89.00 (inc. $102.35)

    Spanners and wrench sets

    Part no. Description Price ex GST
    KT1F06MRN 6pc long double ring wrench set
    10×11 to 22x24mm
    $179.00 (inc. $205.85)
    KT12107MRN 7pc standard speed wrench set
    10-19mm, in pouch
    $139.00 (inc. $159.85)
    KT12112MRN 12pc standard speed wrench set
    8-24mm, in pouch
    + Bonus item
    $289.00 (inc. $332.35)
    KT1214MR 14pc combination wrench set
    10-32mm
    $169.00 (inc. $194.35)
    KT1282MR 12pc stubby ring and open end wrench set
    8-19mm
    $99.00 (inc. $113.85)
    KT1296MRN 6pc ring and open end wrench set
    34-50mm, in pouch
    + Bonus item
    $320.00 (inc. $368.00)

    Torque wrenches, ratchets and drive accessories

    Calibration matters. King Tony state a tolerance of ±4% (clockwise) to DIN ISO 6789:2017 and ASME B107.300-2010, and recommend calibrating at least every 12 months or 5,000 uses.

    Part no. Description Price ex GST
    KT34223-1C1 1/4″ DR torque wrench
    55-250 in.lb / Nm
    $99.00 (inc. $113.85)
    KT34323-2C1 3/8″ DR torque wrench
    15-80 in-lbf / 20.3-108.5 Nm
    $119.00 (inc. $136.85)
    KT34423-2C1 1/2″ DR torque wrench
    50-250 ft.lb / Nm
    $149.00 (inc. $171.35)
    KT4762-10P 1/2″ DR quick release ratchet
    11″, 32 teeth, reversible
    $39.00 (inc. $44.85)
    KT9103PR 3pc 1/4″-1/2″ DR ball retainer socket adapter set
    50mm
    $9.95 (inc. $11.44)
    KT9403PP 3pc magnetic adaptor set
    1/4″ female to 3/4″ male
    $45.00 (inc. $51.75)
    KT39104M 4pc tap holder set
    1/4″ to 1/2″
    $135.00 (inc. $155.25)

    Hex keys, T-handles and Torx

    Part no. Description Price ex GST
    KT20109MR 9pc extra long ball point hex key set
    1.5-10mm
    $29.95 (inc. $34.44)
    KT20109MW 9pc extra long ball point hex key set, colour coded
    1.5-10mm
    $64.95 (inc. $74.69)
    KTST20203MR 13pc extra long ball point hex key set, metric
    H2-H19, chrome plated
    $229.00 (inc. $263.35)
    KT23208MR 8pc hex handle T-wrench set with stand
    H2-H10
    $119.00 (inc. $136.85)
    KT23339PR 9pc Torx T-handle wrench set
    T10-T50
    $149.00 (inc. $171.35)
    KT3109PR8 9pc 3/8″ DR Torx socket rail set
    210mm rail
    $38.00 (inc. $43.70)

    Pliers, adjustable wrenches and punches

    Part no. Description Price ex GST
    KT6511-10C Groove joint pliers, 7 position
    253mm
    $32.00 (inc. $36.80)
    KT6511-13C Groove joint pliers, 7 position
    325mm
    $39.95 (inc. $45.94)
    KT6511-17C Groove joint pliers, 7 position
    425mm
    $65.00 (inc. $74.75)
    KT3611-08R Adjustable wrench, chrome
    200mm
    $28.00 (inc. $32.20)
    KT3611-10R Adjustable wrench, chrome
    250mm
    $35.00 (inc. $40.25)
    KT3611-12R Adjustable wrench, chrome
    300mm
    $41.95 (inc. $48.24)
    KT6625-11 C-clamp grip pliers with moving jaw
    280mm (11″)
    $35.00 (inc. $40.25)
    KT1006PR 6pc pin punch set $35.00 (inc. $40.25)
    KT1009PR 9pc pin punch set $68.95 (inc. $79.29)
    KT1010PR 10pc pin punch set $89.00 (inc. $102.35)

    Screwdrivers and specialty tools

    Part no. Description Price ex GST
    KT35114MR01 14pc screwdriver set
    Insulated screwdriver included
    $79.00 (inc. $90.85)
    KT30117MR 7pc screwdriver set
    Phillips and slotted
    $44.00 (inc. $50.60)
    KT67G0005 5pc ratchet crimping tool set
    Interchangeable jaws
    + Bonus item
    $235.00 (inc. $270.25)
    KT21-20-101 Hand riveter
    2.4-4.8mm capacity, drop-forged aluminium body, stainless steel components
    $37.00 (inc. $42.55)
    KT9TK034 4pc rolling head pry bar set
    150, 300, 400 and 500mm
    + Bonus item
    $199.00 (inc. $228.85)

    Workshop and garage

    Part no. Description Price ex GST
    KT79900-04 Air blow gun, 100mm
    BSPT air inlet, recommended pressure 90 psi
    $10.95 (inc. $12.59)
    KT79900-13 Air blow gun, 330mm
    BSPT air inlet, recommended pressure 90 psi
    $16.95 (inc. $19.49)
    KT9AE42 Oil filter wrench, 3 leg
    1/2″ and 3/8″ drive, 63-102mm
    $29.00 (inc. $33.35)
    KT9BM120-1 Digital tyre gauge
    0-100 psi / 0-7.0 bar / 0-700 kPa, 0.1 psi resolution. Battery not included
    $49.00 (inc. $56.35)

    The Thursday workshop email

    One useful thing a week from people who use the tools. Why cut-off wheels fail early. What to check before buying a puller. Which air tools your compressor can actually run. Thursday mornings, nothing else.

    Read last week’s issue · Sign up

    Questions or want to check stock?

    Call 09 238 3281 or email sales@wallaceheron.co.nz. We don’t just sell tools — we use them.

    Download the full King Tony Summer Promo flyer (PDF)

  • Euroquip – Power Without Limits

    Euroquip – Power Without Limits

    Euroquip’s Oct–Nov 2026 trade flyer runs until the end of November. It covers portable power, CNC cutting tables, plasma cutters, TIG and MIG welders, a handheld laser welder, an air compressor and two hot water pressure cleaners. It’s a strong spread for fabrication shops, engineering workshops and anyone running gear away from mains power.

    Everything below is available through us in Pukekohe. All prices exclude GST unless stated, and apply while stocks last.

    Portable Power

    New in this flyer is the GT Power GTi20000G5 portable power station at $5,495 ($6,319.25 incl. GST). It isn’t a generator: it’s a 2,304Wh lithium battery behind a 3,600W pure sine wave inverter, with no engine, no fuel and no exhaust. GT Power rates it under 30dB, and it recharges from mains in about 2.2 hours. The number that matters is capacity. Divide it by your load to estimate runtime: a little over an hour at 2,000W, or around 38 minutes at the full 3,600W. GT Power also reports independent testing at a 100A welding arc for 30 minutes.

    For longer runs, the generators still win on endurance. The GT Power GT15000E is $4,995 ($5,744.25 incl. GST), down $300. It has electric start, 11,500W max and 10,500W rated, with single and three-phase output on an industrial roll cage frame. The Powertec PT5500i inverter generator is $1,995 ($2,294.25 incl. GST), down $400 and limited to 20 units. It delivers 5,500W peak and 5,000W rated from a 312cc engine, with 32A and 15A outlets, twin USB ports and an optional parallel connection.

    When you size a generator, work to the rated figure, not the peak. Peak covers motor start-up surge for a few seconds. Rated is what the machine will hold all day.

    CNC Cutting Tables

    Two new Strata Workshop Series tables. The WS66 is $5,995 ($6,894.25 incl. GST), with a 610 x 610mm cutting area, lead screw drive with stepper motors and a 39.4L waterbed on locking castors. The WS1212 is $7,995 ($9,194.25 incl. GST), stepping up to 1,250 x 1,100mm of torch travel on a rack and pinion drive, with a 125L waterbed and heavy-duty steel frame. Both have ±0.2mm movement accuracy and a stand-alone CNC controller with USB input.

    Both tables also have automatic torch height control, which matters more than the bed size. Plate warps as it heats, and a torch running at a fixed height drifts out of its ideal standoff partway through a cut. Height control follows the plate, so cut quality and consumable life hold up across the whole sheet. The tables need a plasma cutter with a CNC interface. The AdvanceCut models below have one.

    Plasma Cutters

    The Strata EziCut40i is $1,495 ($1,719.25 incl. GST). It’s a 40A single-phase cutter rated to 20mm, with a 6m PT-60 torch, non-HF arc start and an integrated air regulator with water trap. It runs from a 15A outlet or a 9kVA generator. Strata specifies its air requirement as 110L/min at 5 bar, about 3.9cfm. Check that against your compressor’s air delivery figure, not its displacement.

    The AdvanceCut60 is $1,795 ($2,064.25 incl. GST), which Strata bills as the largest-amperage single-phase plasma cutter in NZ. It cuts 20mm in production with active PFC, a 6m TH-70 style torch and a CNC interface. PFC lets the machine use the supply more efficiently, which helps on a single-phase circuit or a generator rated at 9.5kVA.

    For heavier plate, there are two three-phase machines. The AdvanceCut80 is $2,895 ($3,329.25 incl. GST) and cuts 30mm. The AdvanceCut125 is $4,995 ($5,744.25 incl. GST), delivers 120A and cuts 50mm. Both come with a 6m TH-125 torch, an external air regulator, a 32A 400V three-phase plug and a CNC interface, and both are generator friendly at 15kVA.

    Handheld Laser Welding

    The Strata SLR3000 1500W handheld laser welder is $16,995 ($19,544.25 incl. GST). It welds from 0.2mm to 9mm on single-phase power at a 100% duty cycle, at 20–160cm per minute. The case for laser welding is finishing time: heat stays concentrated in the weld bead, so there is very little distortion or discolouration to clean up afterwards. For production work on thin or visible fabrication, that’s where the cost comes back.

    TIG Welders

    The Strata EziTig200DCi is $1,295 ($1,489.25 incl. GST). It’s a 200A DC pulse TIG/ARC welder weighing 7kg, with an 8m WP17 flex-head torch, cold arc and spot welding modes, lift and HF start, and 10kVA generator compatibility.

    If you weld aluminium, you need AC. DC suits steel and stainless, but AC breaks up the oxide layer on aluminium so the weld can wet in. The Strata AdvanceTig250ACDC covers both. It has a full colour LCD, synergic setup, 20 memory settings and selectable AC waveforms. It comes in three packs: air cooled at $2,995 ($3,444.25 incl. GST), water cooled at $3,895 ($4,479.25 incl. GST), and water cooled with trolley at $4,195 ($4,824.25 incl. GST). Water cooling keeps the torch comfortable on long runs at higher current.

    MIG Welders

    The Strata AdvanceMig400C is $4,895 ($5,629.25 incl. GST), or $6,195 ($7,124.25 incl. GST) as the trolley and separate wire feeder pack. It’s a compact 400A three-phase synergic MIG/ARC/lift TIG machine with a 4-roll geared wire feed, arc gouging capability, inductance control and spool gun compatibility. It runs on a 32A plug.

    The Weldtech WT200MP is $995 ($1,144.25 incl. GST). It’s a gas and gasless MIG/ARC/TIG all-rounder that welds up to 12mm steel and takes 15kg and 5kg spools. Duty cycle is 160A at 60% on MIG.

    The Weldtech MST140i is $375 ($431.25 incl. GST). It’s a 140A gas/gasless MIG/TIG/ARC unit on a standard 10A plug, taking 1kg spools. It comes ready to weld with a 2m Binzel torch, earth and arc leads, hand-held mask, gloves, chipping hammer/brush, wire and drive rollers.

    Air Compressors

    The Air Command AC1600i is $2,595 ($2,984.25 incl. GST), down $100. It’s the largest single-phase compressor in the Air Command range: a 3hp belt-drive unit, assembled in Italy, with a slow-revving 1100rpm pump, built-in after cooler and 100L receiver, running on a 15A plug.

    Its spec sheet shows why compressor figures cause so much confusion. Best displacement is 14.9cfm (421L/min), but air delivery at 90psi is 11.9cfm (337L/min). Displacement is what the pump sweeps. Delivery is what it actually produces at working pressure, and that’s the figure to size your tools against. As an example, the EziCut40i above needs 110L/min, about a third of what the AC1600i delivers.

    Hot Water Pressure Cleaners

    Hot water shifts grease, oil and diesel residue far faster than cold, which is why these suit workshops, plant and agricultural machinery. Both are available to trial through Euroquip’s Dial a Demo service on 0800 387 678.

    The Lavor Hyper 1211 INOX is $6,995 ($8,044.25 incl. GST). It’s a single-phase hot and cold unit on a 15A plug, delivering 1,740psi at 11L/min and reaching 140°C. It’s made in Italy with a stainless steel boiler coil covered by a 5-year boiler warranty, a variable flow handgun, a 10m hose and an onboard detergent tank.

    The Kränzle Therm 1165-1 is $11,295 ($12,989.25 incl. GST), stepping up to 2,390psi at 19.4L/min on three-phase power. It has continuously adjustable pressure, digital temperature control, dry run protection, a four-way safety system and a 35L fuel tank for long runs. It comes with a 2-year commercial warranty.

    Getting Hold of It

    This promotion runs until the end of November 2026, or while stocks last. Images in the flyer may differ slightly from the model supplied.

    If you’re working out runtime on a power station, which plasma cutter suits your plate thickness, or whether your compressor can keep up with a cutter, come and talk to us. We stock this gear because we use it.

    Wallace Heron, Pukekohe, serving trade and industry since 1957.
    Phone 09 238 3281 | sales@wallaceheron.co.nz

  • Tridon Workshop Essentials — Toledo, Sykes-Pickavant, Rennsteig and Matson, October–November 2026

    Tridon Workshop Essentials — Toledo, Sykes-Pickavant, Rennsteig and Matson, October–November 2026

    Tridon’s Workshop Essentials flyer runs from 1 October to 30 November 2026. It covers twelve pages of workshop and service tools across Toledo, Sykes-Pickavant, Rennsteig, Matson and Tridon’s own clamping range: pullers, punches, battery chargers and jump packs, measuring tools, and the specialist service tools that turn a two-hour job into a twenty-minute one.

    Below is a summary of the whole flyer by category, with the full PDF to download at the end. All prices exclude GST unless stated.

    Breaking Seized Fasteners Loose

    Loosening and tightening are two different jobs, and they need two different tools. Toledo specify their click-type torque wrenches for tightening right-hand threads only. A torque wrench is a measuring instrument, not a lever.

    For loosening, the Toledo 301822 Breaker Bar is $139.26 ($160.15 incl. GST). It’s a 1000mm, 3/4″ drive extra heavy-duty bar with a 180° rotating head. Turning force is your push multiplied by the handle length, so a metre of bar does a lot of work for you. For tightening back to spec, the Toledo 301349 3/4″ drive torque wrench is $253.80 ($291.87 incl. GST), with a 68–406Nm scale and ±4% accuracy.

    When even the bar won’t shift a rusted nut, split it. The Toledo 301076 Nut Splitter Set is $40.98 ($47.13 incl. GST). It covers 3–25mm and takes the nut off without damaging the stud or bolt underneath.

    Where there’s no room to swing a long bar, a torque multiplier does the job through gearing instead. A 3:1 multiplier turns your input into roughly three times the output. The Toledo 321009 Torque Multiplier Kit is $674.43 ($775.60 incl. GST): 3:1 planetary gearing, rated to 1500Nm. For heavy plant and truck work, Sykes-Pickavant’s 5:1 multipliers are $2,900 each, in 130–1300Nm with a 1/2″ input (800600) and 270–2700Nm with a 3/4″ input (800655). Both are made in England and supplied in a carry case.

    Battery Charging, Testing and Jump Starting — Matson

    Matson’s battery range covers charging, testing and starting across 12V and 24V systems. That matters in any workshop that sees trucks, tractors or plant alongside cars.

    The MA61224 Multi-Voltage Battery Charger is $435 ($500.25 incl. GST). It charges at 6, 12 or 24V, is lithium compatible at 12 and 24V, and doubles as a 12/24V power supply. Testing comes before charging, though: a battery that won’t hold charge just needs replacing. The BT400 Digital Battery and System Tester is $198.85 ($228.68 incl. GST). It checks starting batteries, cranking and charging systems, and internal resistance, with results in about two seconds. The BT900 is $498 ($572.70 incl. GST) and adds a printer, so the customer gets the test report in hand.

    Four jump starters, sized by job:

    • MA35000 12/24V Lithium Jump Starter — $598 ($687.70 incl. GST). 600A at 12V, 1200A peak, and a 35,000mAh battery that also charges portable devices.
    • RA3800 12/24V Roadside Assist Jump Starter — $1,185 ($1,362.75 incl. GST). Drop-resistant case, built-in voltmeter, rechargeable from 240V AC or 12V DC.
    • MA8000 Thunderbolt Jump Pack — $1,998 ($2,297.70 incl. GST). 2000CCA at 12V and 1000CCA at 24V, on a trolley with 50mm² leads and brass-contact industrial clamps.
    • Antizap jumper leads from $56.29 ($64.74 incl. GST). Three sizes, MASS100AZ, MA354AZ ($274.98) and MA506AZ ($399), all with Matson’s surge protection against the voltage spikes that damage vehicle electronics during a jump start.

    Punches, Chisels and Crowbars — Rennsteig

    Rennsteig is German-made, and every punch and chisel in this flyer is produced in Germany. The difference between punch types matters. A taper punch starts a tight pin moving. A parallel pin punch follows it through, because its constant diameter doesn’t wedge in the hole the way a taper does.

    • 425154 Parallel Pin Punch XXL Set, 5pc — $287.54 ($330.67 incl. GST). 8–16mm with two-component handgrips, in a case.
    • REN03 Chisel, Pin and Centre Punch Set, 8pc — $132.92 ($152.86 incl. GST), in a foam tray sized for tool trolleys.
    • RCP11 Chisel and Punch Tool Roll, 11pc — $178.15 ($204.88 incl. GST). Three cold chisels, seven parallel pin punches and a taper punch.
    • RTP8 Taper and Parallel Pin Punch Set, 8pc — $85.00 ($97.75 incl. GST), in a fabric wallet.
    • 424142 Taper Punch Set with Handguards, 5pc — $92.00 ($105.80 incl. GST). The soft handguard protects your hand from miss-hits.
    • 425170 Parallel Pin Punch Set, 6pc — $71.31 ($82.00 incl. GST), in a plastic stand.
    • Dual-Edged Screw Extractor Sets — $62.55 for the 3pc M5–M12 set (471903), $145.18 for the 5pc M3–M18 set (471906). They work on left- and right-hand threads.
    • Crowbars from $128.06. 30mm forged shafts in 1000mm and 1500mm lengths, with claw, curved or straight edges. The 1.5m straight-edge ball-tip bar is $277.46.

    Pullers, Separators and Bearing Work

    A puller grabs behind a component and draws it off a shaft. A bearing separator goes further: its tapered edges fit behind a bearing where puller legs can’t get a grip. Getting this right is the difference between a clean removal and a damaged shaft.

    From Sykes-Pickavant:

    • 193100 Hydraulic Separator Kit — $590 ($678.50 incl. GST). 876mm reach for bearings deep on long shafts, 20–105mm spread.
    • 095300 Bearing Separator, 50–175mm — $950 ($1,092.50 incl. GST).
    • 095802 Internal Extractor Kit, 13–30mm — $563.18 ($647.66 incl. GST). For bearings and oil seals where a conventional puller can’t reach.
    • 080400 Ball Joint Splitter — $109.34 ($125.74 incl. GST). Separates suspension and steering ball joints without damage.

    From Toledo:

    • Twin and Triple Leg Mechanical Puller Sets, interchangeable between two and three legs: 224030 (1 tonne, 75mm reach) at $76.72, and 224060 (5 tonne, 150mm reach) at $168.91.
    • 265030 Puller and Bearing Separator Master Kit — $874.77 ($1,005.98 incl. GST). Mechanical and hydraulic in one kit.
    • 245300 Slide Hammer Puller Set, front and rear hub — $247.06.
    • 245400 Harmonic Balancer Puller and Installer Set — $243.52.
    • 245500 Universal Joint Puller, 1″–1.25″ — $297.00. Suits passenger vehicles through to tractors.
    • 301540 Bearing and Seal Installer Kit, 20pc — $112.32. Getting the new bearing in squarely matters as much as getting the old one out.
    • 311021 Universal Press Support Tool — $958.97. Three-point support for press work.

    Workshop Hand Tools — Toledo

    Vices and clamps. Fixed-base bench vices in grey cast iron: 301863 (150mm straight) at $341.40, 301869 (150mm offset) at $588.11, and 301870 (200mm offset, 43kg) at $1,150. The 301872 150mm ductile iron G-clamp is $33.34.

    Pliers and grips.

    • Circlip pliers from $29.98. Internal circlips sit in a bore and external circlips sit on a shaft, so the plier has to match. They come in straight and 90° tips up to 230mm. Ratchet-lock circlip plier sets are $128.91 (301800, 18pc) and $276.05 (301850, 14pc, for circlips up to 165mm).
    • Lock-grip pliers. Curved jaw VG180 at $14.14 and VG250 at $15.71. The 301980 sheet metal lock-grip is $32.28.
    • Fencing pliers. The HP10 Parrot Beak Fencing Plier is $33.63: two wire cutters, a parrot lever, hammer, swager and crimper. The FP10 Combination Fencing Plier, with a wider 0–52mm jaw, is $28.45.
    • Crimping. CT16 Ratcheting Crimping Plier at $142.65, for 1–16mm² terminals. WS665 Crimper, Cutter and Stripper at $51.18.

    Keys and wrenches.

    • Folding hex key sets, metric or imperial, at $26.06. Folding Torx set, T9–T40, at $29.98.
    • Ratchet podgers from $66.17. The tapered end lines up bolt holes, and the ratchet end does the tightening.
    • 301483 SAE Fixed Head Ratchet Wrench Set, 13/16″–1″, at $122.17.

    Threads. 321075 HSS Thread Restoring Tap and Die Set, metric 20pc, at $446.00. 321050 Tap and Die Ratchet Handle Master Set, 75pc, at $340.32. For old British threads, the Sykes-Pickavant 015600 BSW/BSF Thread Restorer is $66.12. It’s a file that cleans up damaged threads where a die won’t fit.

    Scrapers, pry bars and pick-up.

    • 301542 Gasket Scraper Kit, 42pc, at $58.74. 301007 Gasket Scraper at $9.35. 301247 Razor Scraper Set at $15.51.
    • 321506 Mini Pry Bar Set, for trims, seals and O-rings, at $43.86.
    • 301562 Deburr Tool Set at $247.11.
    • 301189 Telescopic Magnetic Pick-Up Broom, rated to 9kg, at $152.91. It clears swarf and dropped fasteners off the shop floor.

    Organisation.

    • Socket rails from $9.54.
    • 301167 Spanner Rack Organiser at $10.45.
    • 301188 Magnetic Storage Tray at $75.95.
    • 301941 Magnetic Guard Cover at $62.85.
    • Security spring hooks for working at height, rated 1–5kg, from $26.37.
    • 321992 Pocket Screwdriver at $7.43.
    • 301164 Washer Jet Cleaning Needle at $10.46.

    Sykes-Pickavant’s 052900 Flat Face Pein and Finish Hammer is $121.38.

    Lubrication and Oil Service

    • 305444 Mini Grease Gun — $44.97. 85g cartridge, with a 150mm extension and a four-jaw coupler.
    • 310004 Oil Filling Hopper — $380.57. Six adaptors for mess-free top-ups.
    • 305229 Transfer Gun, 350ml — $85.14. Handles oils, fuel, coolant and brake fluid.
    • 305181 and 305182 Oil Filter Fluid Catch — $36.74 each, for filters from 63–67mm and 73–76mm.
    • 309984 Wheel Axle Drain Pan, 5L — $51.29.
    • Filter removal: 305169 Oil Filter Pliers, 55–125mm, at $48.11. 305800 Oil Filter Cup Wrench Set, 19pc, at $330.26. Truck oil filter wrenches for MAN ($108.23), Scania ($83.80) and Iveco ($99.95).

    Mechanical Service

    Cooling. A pressure test finds the leak that a visual check misses. The 308500 Cooling System Pressure Tester and Vacuum Purge Kit is $782.20 ($899.53 incl. GST). It pressure tests the system and radiator cap, then purges and refills. Toledo say its application list covers 95% of the Australian and New Zealand car parc. For heavy vehicles, the 308380 Cooling System Tester Truck is $601.92.

    Engine.

    • 304992 Piston Ring Compressor, 90–200mm, at $105.83.
    • 304995 Belt Tensioner Tool Set at $79.32.
    • 303199 Inlet Manifold Wrench, 13mm (OEM equivalent T10535), at $64.17.
    • Subaru Pulley Holding Tools, three versions built to OEM specification, at $109.09 each.

    Brakes, wheels and steering.

    • Sykes-Pickavant 036150 Brake Caliper Windback Kit, for left- and right-hand threads, at $316.85.
    • 310277 Drum Brake Service Kit at $131.77.
    • 311014 Adjustable Wheel Bearing Lock Nut Wrench at $544.06.
    • 311278 Tie Rod End Removal Tool at $18.18.

    Exhaust and tyres.

    • 321003 Exhaust Pipe and Tailpipe Service Kit at $430.26.
    • 302218 Tyre Inflator, 220psi, at $188.80.
    • 309102 Tyre Tread Depth Gauge at $15.62.
    • 309983 Valve Core Remover at $19.98.
    • 302309 Telescopic Bonnet and Tailgate Support Stand at $46.68.

    Panel and Trim

    Modern trim clips break if you lever them with a screwdriver. The right tool pops the clip without damaging the clip or the panel around it.

    • 313325 Trim and Clip Removal Master Set, 7pc, at $249.69.
    • 313324 Trim Removal Tool Set at $28.20.
    • 313326 Omega Trim Clip Remover, for VAG, Mercedes-Benz, Porsche and Tesla, at $50.97.
    • 313028 Manual Vacuum Dent Puller, with a 2.5kg slide hammer, at $468.80.
    • 313055 Panel Beating Hammer, hickory handle, at $56.60.

    Measuring

    Most of Toledo’s measuring range in this flyer is made in Japan.

    • Stainless taper gauges, accurate to ±0.05mm, for internal diameters: 1–15mm ($47.71), 30–45mm ($110.46) and 45–60mm ($132.34).
    • Spring dividers and inside and outside calipers from $34.40.
    • 150mm stainless rules from $9.82.
    • 322020 Sliding Bevel, 250mm, at $60.94.

    Electrical Service

    • 302100 Soldering Iron, 240V 25W, at $28.60.
    • 302145 Circuit Tester, 6–24V DC with a retractable lead, at $33.75.
    • 303175 Battery Terminal Puller, for seized or corroded terminals, at $8.32.
    • 303186 Battery Terminal Spreader Plier at $29.98.

    Tridon Clamps

    When an off-the-shelf hose clip won’t reach, Tridon Uniband is 301 stainless band on a 30m reel, cut to length on the job. It handles large hoses, pipes, tanks, power poles and pallet bundling, in four widths from 9.5mm to 19mm, from $69.45 ($79.86 incl. GST). The CT1 Banding Tool tensions the band and cuts it off in one operation, at $137.02 ($157.57 incl. GST).

    For workshops that go through hose clamps, Tridon’s modular drawer merchandisers keep popular sizes sorted. CMSHS250 holds 250 part-stainless clamps at $375.31. CMHAS200 holds 200 all-stainless clamps at $476.71.

    Download the Flyer

    The full twelve-page Tridon Workshop Essentials flyer is available to download below, with complete specifications for every item. If you’re after something from it, or a Tridon tool that isn’t listed, give us a call on 09 238 3281 or email sales@wallaceheron.co.nz.

    Tridon Workshop Essentials — Toledo, Sykes-Pickavant, Rennsteig and Matson, October–November 2026

  • CRC Summer Road Trip – Be in to Win

    CRC Summer Road Trip – Be in to Win

    What’s on

    CRC’s Summer Road Trip promotion runs from 1 October to 30 November 2026. Buy any CRC product in that window and you can enter the draw for one of three Z Service Station fuel cards: $2,000, $1,500 and $1,000.

    There’s no spend threshold and no qualifying product list. A single can counts.

    How to enter

    1. Buy any CRC product from us between 1 October and 30 November.
    2. Enter online at crc.co.nz. There’s a QR code on the poster at our counter that takes you straight to the entry form.
    3. Keep your receipt.

    Entry, the draw and the prizes are handled by CRC, not by us. Three winners are drawn, one prize each, not transferable and not redeemable for cash. Full terms and conditions are on CRC’s site.

    What qualifies — the CRC range by category

    Every CRC product we stock counts toward an entry. Here’s what that covers.

    Rust and corrosion

    The full sequence for treating rusted steel: Exoff to clean, Evapo-Rust Spray Gel to remove rust, Rust Converter for what’s left in the seams, and Metal Armour zinc-rich primer to seal it. Rust Converter also comes brush-on in 250ml, 1 litre and 5 litre for bigger areas.

    Cleaning and degreasing

    Exoff Degreaser & Parts Cleaner strips oil, grease and workshop grime off parts and surfaces. Also available in a 5 litre for parts washers and bigger jobs.

    Lubrication and protection

    White Lithium Grease for hinges, linkages and slides. Dry-Glide where a wet lubricant would just collect grit. CRC 66 Marine for gear that lives near salt water.

    Anti-seize and assembly

    Copper Anti Seize stops threads seizing under heat — exhaust studs, manifold bolts, anything that gets hot and has to come apart again. Also in a 75ml tube for the toolbox. F2 Multi Spray Adhesive for trim and general bonding.

    Cutting and tapping

    Cutting Oil in an aerosol for tapping, drilling and threading without burning the cutting edge, or as a 500ml liquid for machine work.

    Engine and exhaust

    Engine Start for cold or stubborn engines. Exhaust Maniseal seals leaking exhaust and manifold joints. Etch It prepares bare metal for paint.

    Food grade range

    CRC’s food grade products are formulated for use where incidental food contact is possible — food processing, packaging lines and commercial kitchens. We stock the range across lubrication, cleaning and anti-seize, including Food Grade 5.56, Chain Lube, Dry Lube, Co Contact Cleaner, Anti-Seize and Silicone Grease.

    Not sure which one you need?

    CRC make a lot of cans that look alike and do different things. We’ve put together a job-by-job guide to picking the right one — read it here.

    Browse and buy

    Call us on 09 238 3281, email sales@wallaceheron.co.nz, or come and see us in Pukekohe. Promotion ends 30 November 2026.

  • Makita Rule the Outdoors — Bonus Batteries on Qualifying LXT & XGT Outdoor Gear

    Makita Rule the Outdoors — Bonus Batteries on Qualifying LXT & XGT Outdoor Gear

    Makita’s Rule the Outdoors promotion runs from 1 September 2026 to 31 March 2027. Buy a qualifying LXT or XGT outdoor tool or kit, and Makita sends you bonus batteries or a battery and charger pack through online redemption.

    Every qualifying model is available to order through Wallace Heron. Tell us the model number and we’ll price it and bring it in.

    How the redemption works

    • Buy a qualifying model between 1 September 2026 and 31 March 2027.
    • Claim online with Makita at makita.co.nz, uploading your tax invoice as proof of purchase.
    • Platforms don’t cross over. LXT bonus batteries redeem against LXT tools, XGT against XGT.

    Claim deadlines, limits and full terms are set by Makita — check the Makita promotion page before you buy.

    LXT 18V | 36V

    Bonus battery — up to $197 bonus value

    • DHW180PF01 — 18V LXT 348psi Pressure Washer (3.0Ah) Kit
    • DLM330SM — 18V LXT 330mm (13″) Lawn Mower (4.0Ah) Kit
    • DUB187T004 — 18V LXT Brushless Blower / Vacuum with T-Nozzle
    • DUV320Z — 18V LXT 200mm Scarifier

    Two free BL1850B 5.0Ah batteries — up to $394 bonus value

    • DLM466CT2 — 18Vx2 LXT Brushless 460mm (18″) Lawn Mower 5.0Ah Kit
    • DLX2568SG — 18V LXT 330mm (13″) Lawn Mower & Blower/Vacuum Combo (6.0Ah) Kit

    Free 198928-5 battery and charger pack — up to $655 bonus value

    • DCU180ZB — 18V LXT Brushless Material Handler Frame / Bucket
    • DCU180ZF — 18V LXT Brushless Material Handler Frame / Bucket
    • DCU601Z — 18Vx2 LXT Brushless Electric Lift Pipeframe
    • DCU602Z — 18Vx2 LXT Brushless Electric Dump Bucket
    • DCU603Z — 18Vx2 LXT Brushless Manual Dump Bucket
    • DCU604Z — 18Vx2 LXT Brushless Manual Dump Bucket
    • DCU605Z — 18Vx2 LXT Brushless Wheelbarrow 300kg

    XGT 40Vmax | 80Vmax

    • DG002GZ — 40Vmax XGT Brushless Earth Auger
    • HW001GZ — 40Vmax XGT Water Blaster
    • LM003GZ — 40Vmax XGT 380mm (15″) Lawn Mower
    • LM004GZ — 40Vmax XGT 430mm (17″) Lawn Mower
    • PM001GZ01 — 40Vmax XGT Brushless Backpack Mist Blower
    • UA004GZ — 40Vmax XGT Brushless 300mm (12″) Telescopic Pole Saw
    • UB001GM101 — 40Vmax XGT Brushless Blower 4.0Ah Kit
    • UB002GM101 — 40Vmax XGT Cordless Blower (4.0Ah) Kit

    These are highlights. The full qualifying list, including line trimmers, hedge trimmers and more tree-care tools, is in the Makita Rule the Outdoors flyer.

    Already on our shelf

    These LXT tools are in stock now. They aren’t part of the redemption, but they run on the same 18V batteries — so any bonus batteries you claim will power them too.

    Order a qualifying model

    Call us on 09 238 3281 or email sales@wallaceheron.co.nz with the model number. We’ll confirm price and lead time, and get it to you in Pukekohe or on the road.

    We don’t just sell tools — we use them.

  • Euroquip Spring Gear 2026 — Generators, Heaters, Welding and Air Tools

    Euroquip Spring Gear 2026 — Generators, Heaters, Welding and Air Tools

    Euroquip’s Spring Gear promotion runs until the end of September 2026. It covers generators, diesel and infra-red heaters, welding equipment, air compressors and accessories, and petrol waterblasters — a broad spread of gear that suits workshops, farms and rural properties heading out of winter.

    We’ve picked this one up partway through its run, so there is roughly a month left on it. Everything below is available through us in Pukekohe. All prices exclude GST unless stated, and apply while stocks last.

    Generators

    Four inverter generators in this flyer, spanning a wide range of output and price. Inverter generators produce a clean, stable waveform, which matters if you are running anything with electronic controls — modern tools, chargers, laptops, or pumps with variable speed drives. A conventional generator will run a work light or a heater happily, but sensitive equipment wants an inverter.

    The one worth understanding properly is the GT4000i-LPG dual fuel unit at $2,495 ($2,869.25 incl. GST). It runs on either petrol or LPG with the regulator included, delivering 4000W max on petrol and 3600W on gas. The LPG option is the interesting part: petrol degrades in a tank that sits unused between outages, while an LPG bottle holds its charge indefinitely. For standby power that might sit idle for months, that decides whether it starts when you need it. It also has two-wire start for solar integration, and a silenced casing at 59dB. The GT4000ESi petrol-only version is $2,095 ($2,409.25 incl. GST).

    New this flyer is the PTi4500 at $865 ($994.75 incl. GST) — 4500W max, 4200W rated, and a genuine one-person lift at 29.5kg with a 13L tank. Below it, the PT3200i silenced unit is $1,295 ($1,489.25 incl. GST) at 3300W peak and 55dB, super portable at 22kg. At the top, the PT5500i is $2,295 ($2,639.25 incl. GST), down $100, with 5500W peak, a 312cc engine, and a 32A outlet.

    When you are sizing a generator, work to the rated figure rather than the peak. Peak covers motor start-up surge for a few seconds; rated is what the machine will hold all day.

    Remington Heaters

    End-of-winter pricing across the Remington range, which is where the savings in this flyer are largest.

    The radiant diesel heaters throw heat directly at objects and people rather than warming the air, which makes them the right choice for workshops with big roller doors and poor sealing — the heat lands where you are standing instead of escaping every time the door opens. The RPK75R at 75,000BTU / 22kW is $799 ($918.85 incl. GST), down $50. The RPK130R at 130,000BTU / 38kW is $1,799 ($2,068.85 incl. GST), down $200.

    The RPK1300F forced air diesel heater at the same 130,000BTU / 38kW output is $699 ($803.85 incl. GST), down $100. Forced air heats the volume of air in a space, so it suits enclosed sheds and workshops that hold their heat.

    The infra-red heaters are the quiet option — silent FAR radiant heat with triple combustion technology, tip-over and overheat sensors, a digital thermostat and timer, and four industrial castors. Suited to hospitality, event venues and warehouse workstations where a forced air fan would be intrusive. The IRH14 at 14kW is $2,849 ($3,276.35 incl. GST), down $150, and the IRH22 at 22kW is $3,149 ($3,621.35 incl. GST), down $250. The IRH22 is Remington’s best seller in the range.

    If you are running a diesel heater in an enclosed workshop, shop or hospitality space, ventilation is not optional. The new 8pc D75 flue kit (#42547) at $299 ($343.85 incl. GST) vents combustion gases outside, which is what keeps a low-airflow space safe as well as warm. Worth building into the budget rather than treating as an accessory.

    Remington are including a free beanie (#BEANIERP) with heater purchases across this promotion.

    Welding — Strata and Weldtech

    The headline here is the new Workshop Series CNC cutting tables, which bring plasma profile cutting into a footprint that fits an ordinary workshop. The WS66 at $5,995 ($6,894.25 incl. GST) has a 610 x 610mm cutting area, lead screw drive with stepper motors, a 39.4L integrated waterbed and locking castors. The larger WS1212 at $7,995 ($9,194.25 incl. GST) steps up to a 1250 x 1100mm torch travel area with rack and pinion drive, a 125L waterbed and a heavy-duty steel frame. Both carry automatic torch height control and a stand-alone CNC controller with USB input, holding ±0.2mm movement accuracy.

    The ADVANCEARC inverter welders are DC ARC / lift TIG machines with power factor correction, VRD protection and multi-voltage input. The 160A model is $575 ($661.25 incl. GST) on a 10A plug; the 200A model is $675 ($776.25 incl. GST) on a 15A plug. Both are generator friendly — 6.5kVA for the 160A, 8kVA for the 200A — which is worth checking against your generator’s rated output if you weld off site.

    The WT200MP at $995 ($1,144.25 incl. GST) is a three-process machine covering gas and gasless MIG, ARC and TIG in one 13kg unit. It welds up to 12mm steel, with duty cycles of 160A at 60% on MIG and 130A at 60% on ARC/TIG, takes both 15kg and 5kg spools, and carries an 18 month trade warranty. For a mixed-job workshop or a mobile operator, one machine covering three processes removes a lot of compromise.

    New in this flyer is the ADVANCECUT60 60A plasma cutter at $1,795 ($2,064.25 incl. GST) — 20mm production cut, active PFC, a full colour LCD screen, an industrial-duty Hypertherm-style TH-70 torch on a 6 metre lead, and a CNC interface connection. That last point matters if you are considering one of the cutting tables above.

    Compressors and Air Accessories

    The RAS221 1.5HP 21L oil-less silent compressor at $255 ($293.25 incl. GST) is an oil-less twin pump design delivering 120L/min FAD at 90psi. Oil-less means no oil carryover into the air line, which is what you want for spraying and air brushing. Runs on a 10A plug.

    The ViperFlex hybrid polymer air hose is worth a mention beyond the price. Rated to 300psi, it holds no memory — meaning it lays flat where you drag it instead of coiling back into a spring — and stays flexible at sub-zero temperatures where PVC stiffens and cracks. The 10m (AC10HS) is $39 ($44.85 incl. GST), down $10, and the 20m (AC20HS) is $69 ($79.35 incl. GST), down $10.

    Smaller air accessories in the flyer: the RA1433 inline tyre inflator at $31 ($35.65 incl. GST), 100PSI rated with a 1/4″ ARO male fitting; air blow guns at $6 for the 100mm (RA1454) and $8 for the 300mm (RA1456); the RA110 air brush kit with storage case at $19 ($21.85 incl. GST); and the RA5000 engine cleaning gun at $23 ($26.45 incl. GST).

    Waterblasters

    Two new Powershot petrol waterblasters, both with AR triplex pumps and brass pump heads, five quick-connect nozzles and a maximum water temperature of 50°C.

    The PS3400 at $1,295 ($1,489.25 incl. GST) delivers 3400PSI at 11.4 LPM from an 8HP Powerdyne OHV engine, on a two-wheel trolley frame with a 10m steel-braided hose. The PS4400 at $2,195 ($2,524.25 incl. GST) steps up to 4400PSI at 15 LPM with a 16HP engine, a four-wheel trolley, a 15m hose and a siphon tube detergent system.

    Flow rate is the specification people tend to overlook. Pressure lifts the dirt; flow carries it away. If you are washing large areas — yards, plant, stock trailers — the extra 3.6 LPM on the PS4400 will show up in how long the job takes.

    Getting Hold of It

    This promotion runs until the end of September 2026, or while stocks last. Download Now

    Images in the flyer may differ slightly from the model supplied.

    If you are working out which generator suits your load, whether radiant or forced air is right for your workshop, or what a CNC cutting table would need from your air supply, come and talk to us. We stock this gear because we use it.

    Wallace Heron, Pukekohe — serving trade and industry since 1957.
    Phone 09 238 3281 | sales@wallaceheron.co.nz

  • Trade Essentials Issue 71 | 1 August – 31 October 2026

    Trade Essentials Issue 71 | 1 August – 31 October 2026

    The new Trade Essentials flyer has landed — Issue 71, running 1 August through 31 October 2026 — and it’s a big one. Three months of trade pricing across air tools, magnetic base drills, tool storage, lifting and rigging, workshop equipment and consumables, all from the brands we stock because they hold up to real work.

    Here’s what stands out this issue.

    M7 Air Tools — Our Featured Range

    M7’s professional pneumatic range takes centre stage for us this issue: air belt sanders for tight-access weld blending and finishing, die grinders, needle scalers, air hammers, impact wrenches, air drills, hydraulic riveters and more. If it runs off an air line, there’s a good chance it’s in this flyer at Trade Essentials pricing. Keep an eye on our emails over the coming weeks — we’ll be digging into our picks from the range and what they’re best at.

    Holemaker Magnetic Base Drills & Annular Cutters

    The full Holemaker mag drill lineup is on offer — from the compact PRO35 and the ultra-low-profile PRO36AD angle drill through to the heavy-hitting PRO65 for high-volume steel fabrication. Backing them up is the complete Silver Series annular cutter range in 25mm and 50mm depths of cut, plus carbide burr sets, step drills and countersink sets. If you drill steel for a living, this section is worth a good look.

    Teng Tools — Kits, Trays and Storage

    Teng’s modular system is well represented: complete roller cabinet tool kits from the 205-piece Classic up to the 1295-piece Monster Stack, empty chests and cabinets, and a wide selection of TT trays — socket sets, spanners, pliers, screwdrivers and more — that drop straight into your existing storage. A tidy way to build out a tool control system one tray at a time.

    ITM Lifting & Rigging

    A comprehensive lifting section this issue: 240V and 415V electric chain hoists, wire rope hoists, girder trolleys, drum lifters, flat web and round slings from 5,000kg to 10,000kg rated capacity, G70 transport chain kits, shackles, eyebolts and link chain. All tested and certified to the relevant standards, with test certificates supplied.

    Workshop Equipment & Compressors

    ITM and ABAC air compressors from portable X Lite units through to three-phase silenced cabinet machines, plus ProEquip fuel handling gear — and a flyer special worth knowing about: buy a ProEquip 200L diesel tank and receive a $50 fuel voucher, or a 400L tank for a $100 voucher, valid for the full flyer period.

    Consumables & Assortments

    The everyday stuff that keeps the workshop running: the full ISL UV nylon cable tie range, Champion assortments covering fasteners, circlips, grease nipples, O rings, fuses and more, plus paper wipes, absorbent mats and cleaning supplies.

    Something for After Knock-Off

    Rounding out the issue: Worksharp precision knife sharpeners and the nomadiQ portable gas BBQ and two-burner stove — compact, foldable and built for the ute.

    Trade Essentials Issue 71 pricing runs until 31 October 2026, while stocks last. Browse the full range in the flyer, then order online, call us on 09 238 3281, or drop into the Pukekohe store.

    Download the flyer now

  • NEW Equipment for Mobile and Site Operations – June-July 2026

    NEW Equipment for Mobile and Site Operations – June-July 2026

    Professional equipment designed for the realities of site work, mobile fabrication, and workshops where flexibility matters more than fixed installations.

    NEW Equipment That Goes Where the Work Is
    Some of the best work happens away from the bench. This month’s NEW additions showcase equipment that eliminates the constraints of extension leads, fixed installations, and workshop-only operations.

    Featured NEW Products:
    • AC7.5CP Compact Petrol Compressor – Professional air delivery with vehicle-mount ready design
    • FE210ARM Mobile Fume Extractor – W3-certified filtration with 3m flexible positioning arm
    • PT3200i Silenced Inverter Generator – 3300W portable power in a 22kg package
    • EziArc DC Inverter Welders – Generator-friendly welders with lift TIG capability
    • Professional Heaters and Fume Extraction Systems – Complete range for workshop air quality

    Solving Real Mobile Work Challenges
    Every piece of equipment in this range addresses the specific challenges of mobile operations and site-based work. The AC7.5CP delivers 443 L/min FAD without mains power dependency, while the FE210ARM brings W3-certified air quality protection to wherever welding happens.

    These aren’t workshop tools adapted for site use — they’re purpose-built for the realities of mobile fabrication, construction sites, and operations where traditional fixed installations simply don’t work.

    Professional Capability, Portable Design
    The shift toward mobile operations demands equipment that doesn’t compromise professional capability for portability. The FE210ARM’s 2500m³/h extraction capacity matches fixed systems while providing 3-meter flexible positioning. The AC7.5CP’s twin cylinder pump with aftercooler delivers consistent air quality during sustained operation.

    From automatic engine idle control that extends runtime to differential pressure monitoring that maintains extraction performance, these tools incorporate the intelligent features that professional mobile work requires.

    Availability and Technical Support
    All equipment is available through July 2026 or while stocks last. Several items feature savings, including $100 off the PT3200i generator. Professional installation support available for vehicle-mount compressor systems and permanent fume extraction installations.

    Our team has hands-on experience with mobile operations and can provide application-specific guidance on equipment selection, installation requirements, and compliance considerations for site-based work.

    Wallace Heron – 67 years in trade
    Pukekohe • 09 238 4079

    View the complete flyer PDF for technical specifications and detailed product information.

  • King Tony Winter Promo – Jun-Jul 2026

    King Tony Winter Promo – Jun-Jul 2026

    The King Tony Winter Promo 2026 is here, running from 1st June 2026 to 31st July 2026, and it’s packed with sharp seasonal deals across sockets, wrenches, impact tools, torque wrenches, bit sets, pliers, hand tools, workshop storage and full tool kits. Across the flyer you’ll find savings on everything from torque wrenches and impact socket sets (page 2) to deep impact sockets, bit sets and speed wrench kits (page 3), ring & open-end wrench sets, Torx sockets and portable wrench sets (page 4), all the way through to flex speed wrenches, pliers, hex keys, air tools and T-handle Torx sets (page 5).

    The final page features King Tony’s biggest workshop upgrades — 6- and 9-drawer tool chests, roller cabinets and a 7-drawer tool trolley, plus a fully kitted 7-drawer roll cab tool set loaded with 325 pieces of sockets, wrenches, pliers, drivers, hammers and accessories (page 6).

    Every purchase of $50+GST during the promo period also puts you into the King Tony Winter Prize Draw, with a chance to win a 275-piece Squad Super Large Roller Workstation valued at $5,999 RRP (page 1).

    If you’re gearing up for winter servicing, maintenance or workshop upgrades — this is the flyer to shop from.

    ? Download the full King Tony Winter Promo flyer

  • Tridon Workshop Essential Tools – June to July 2026 Flyer

    Tridon Workshop Essential Tools – June to July 2026 Flyer

    Tridon’s Workshop Essential Tools flyer is back, and it’s built around what they do best — workshop essentials that solve real problems, from mechanical service and pulling tools through to electrical, battery, and specialty gear.

    Running 1 June to 31 July 2026, this flyer covers a wide spread of kit suited to automotive workshops, engineers, mechanics, motorcycle workshops, fleet operators, and serious DIYers. You’ll find everything from pullers, bearing separators and extraction tools, through to punches, chisels, brake service tools, grease guns, electrical testers and battery gear — all from brands that are proven in the trade and built for repeat use.

    What we like about this flyer is its focus on core workshop capability:

    • Tools that get you behind the job — a deep range of pullers, bearing separators and seal/race drivers for service and extraction work
    • Gear that marks out and measures accurately (engineering squares, magnetic levels, feeler gauges, scribers)
    • Equipment designed to save time and prevent damage during servicing, pulling, brake work and lubrication
    • A solid spread of mechanical, electrical and specialty tools, including a dedicated motorcycle range, that belong in every serious workshop

    As always, Tridon have pulled together products from trusted brands including Toledo, Sykes-Pickavant, Rennsteig (made in Germany), Matson and Bikeservice — with clear specs and sharp pricing for a limited time.

    ? If you’re planning tool upgrades, restocking the workshop, or just want to see what’s worth adding to the bench, this flyer is well worth a look.

    Download Now