Euroquip’s Spring Gear promotion runs until the end of September 2026. It covers generators, diesel and infra-red heaters, welding equipment, air compressors and accessories, and petrol waterblasters — a broad spread of gear that suits workshops, farms and rural properties heading out of winter.
We’ve picked this one up partway through its run, so there is roughly a month left on it. Everything below is available through us in Pukekohe. All prices exclude GST unless stated, and apply while stocks last.
Generators
Four inverter generators in this flyer, spanning a wide range of output and price. Inverter generators produce a clean, stable waveform, which matters if you are running anything with electronic controls — modern tools, chargers, laptops, or pumps with variable speed drives. A conventional generator will run a work light or a heater happily, but sensitive equipment wants an inverter.
The one worth understanding properly is the GT4000i-LPG dual fuel unit at $2,495 ($2,869.25 incl. GST). It runs on either petrol or LPG with the regulator included, delivering 4000W max on petrol and 3600W on gas. The LPG option is the interesting part: petrol degrades in a tank that sits unused between outages, while an LPG bottle holds its charge indefinitely. For standby power that might sit idle for months, that decides whether it starts when you need it. It also has two-wire start for solar integration, and a silenced casing at 59dB. The GT4000ESi petrol-only version is $2,095 ($2,409.25 incl. GST).
New this flyer is the PTi4500 at $865 ($994.75 incl. GST) — 4500W max, 4200W rated, and a genuine one-person lift at 29.5kg with a 13L tank. Below it, the PT3200i silenced unit is $1,295 ($1,489.25 incl. GST) at 3300W peak and 55dB, super portable at 22kg. At the top, the PT5500i is $2,295 ($2,639.25 incl. GST), down $100, with 5500W peak, a 312cc engine, and a 32A outlet.
When you are sizing a generator, work to the rated figure rather than the peak. Peak covers motor start-up surge for a few seconds; rated is what the machine will hold all day.
Remington Heaters
End-of-winter pricing across the Remington range, which is where the savings in this flyer are largest.
The radiant diesel heaters throw heat directly at objects and people rather than warming the air, which makes them the right choice for workshops with big roller doors and poor sealing — the heat lands where you are standing instead of escaping every time the door opens. The RPK75R at 75,000BTU / 22kW is $799 ($918.85 incl. GST), down $50. The RPK130R at 130,000BTU / 38kW is $1,799 ($2,068.85 incl. GST), down $200.
The RPK1300F forced air diesel heater at the same 130,000BTU / 38kW output is $699 ($803.85 incl. GST), down $100. Forced air heats the volume of air in a space, so it suits enclosed sheds and workshops that hold their heat.
The infra-red heaters are the quiet option — silent FAR radiant heat with triple combustion technology, tip-over and overheat sensors, a digital thermostat and timer, and four industrial castors. Suited to hospitality, event venues and warehouse workstations where a forced air fan would be intrusive. The IRH14 at 14kW is $2,849 ($3,276.35 incl. GST), down $150, and the IRH22 at 22kW is $3,149 ($3,621.35 incl. GST), down $250. The IRH22 is Remington’s best seller in the range.
If you are running a diesel heater in an enclosed workshop, shop or hospitality space, ventilation is not optional. The new 8pc D75 flue kit (#42547) at $299 ($343.85 incl. GST) vents combustion gases outside, which is what keeps a low-airflow space safe as well as warm. Worth building into the budget rather than treating as an accessory.
Remington are including a free beanie (#BEANIERP) with heater purchases across this promotion.
Welding — Strata and Weldtech
The headline here is the new Workshop Series CNC cutting tables, which bring plasma profile cutting into a footprint that fits an ordinary workshop. The WS66 at $5,995 ($6,894.25 incl. GST) has a 610 x 610mm cutting area, lead screw drive with stepper motors, a 39.4L integrated waterbed and locking castors. The larger WS1212 at $7,995 ($9,194.25 incl. GST) steps up to a 1250 x 1100mm torch travel area with rack and pinion drive, a 125L waterbed and a heavy-duty steel frame. Both carry automatic torch height control and a stand-alone CNC controller with USB input, holding ±0.2mm movement accuracy.
The ADVANCEARC inverter welders are DC ARC / lift TIG machines with power factor correction, VRD protection and multi-voltage input. The 160A model is $575 ($661.25 incl. GST) on a 10A plug; the 200A model is $675 ($776.25 incl. GST) on a 15A plug. Both are generator friendly — 6.5kVA for the 160A, 8kVA for the 200A — which is worth checking against your generator’s rated output if you weld off site.
The WT200MP at $995 ($1,144.25 incl. GST) is a three-process machine covering gas and gasless MIG, ARC and TIG in one 13kg unit. It welds up to 12mm steel, with duty cycles of 160A at 60% on MIG and 130A at 60% on ARC/TIG, takes both 15kg and 5kg spools, and carries an 18 month trade warranty. For a mixed-job workshop or a mobile operator, one machine covering three processes removes a lot of compromise.
New in this flyer is the ADVANCECUT60 60A plasma cutter at $1,795 ($2,064.25 incl. GST) — 20mm production cut, active PFC, a full colour LCD screen, an industrial-duty Hypertherm-style TH-70 torch on a 6 metre lead, and a CNC interface connection. That last point matters if you are considering one of the cutting tables above.
Compressors and Air Accessories
The RAS221 1.5HP 21L oil-less silent compressor at $255 ($293.25 incl. GST) is an oil-less twin pump design delivering 120L/min FAD at 90psi. Oil-less means no oil carryover into the air line, which is what you want for spraying and air brushing. Runs on a 10A plug.
The ViperFlex hybrid polymer air hose is worth a mention beyond the price. Rated to 300psi, it holds no memory — meaning it lays flat where you drag it instead of coiling back into a spring — and stays flexible at sub-zero temperatures where PVC stiffens and cracks. The 10m (AC10HS) is $39 ($44.85 incl. GST), down $10, and the 20m (AC20HS) is $69 ($79.35 incl. GST), down $10.
Smaller air accessories in the flyer: the RA1433 inline tyre inflator at $31 ($35.65 incl. GST), 100PSI rated with a 1/4″ ARO male fitting; air blow guns at $6 for the 100mm (RA1454) and $8 for the 300mm (RA1456); the RA110 air brush kit with storage case at $19 ($21.85 incl. GST); and the RA5000 engine cleaning gun at $23 ($26.45 incl. GST).
Waterblasters
Two new Powershot petrol waterblasters, both with AR triplex pumps and brass pump heads, five quick-connect nozzles and a maximum water temperature of 50°C.
The PS3400 at $1,295 ($1,489.25 incl. GST) delivers 3400PSI at 11.4 LPM from an 8HP Powerdyne OHV engine, on a two-wheel trolley frame with a 10m steel-braided hose. The PS4400 at $2,195 ($2,524.25 incl. GST) steps up to 4400PSI at 15 LPM with a 16HP engine, a four-wheel trolley, a 15m hose and a siphon tube detergent system.
Flow rate is the specification people tend to overlook. Pressure lifts the dirt; flow carries it away. If you are washing large areas — yards, plant, stock trailers — the extra 3.6 LPM on the PS4400 will show up in how long the job takes.
Getting Hold of It
This promotion runs until the end of September 2026, or while stocks last. Download Now
Images in the flyer may differ slightly from the model supplied.
If you are working out which generator suits your load, whether radiant or forced air is right for your workshop, or what a CNC cutting table would need from your air supply, come and talk to us. We stock this gear because we use it.
Wallace Heron, Pukekohe — serving trade and industry since 1957.
Phone 09 238 3281 | sales@wallaceheron.co.nz